Formulation ID: 1368
Soften and condition your beard with this conditioning serum packed with natural oils and STEPANQUAT® Soleil, a naturally-derived conditioning agent made from non-GMO sunflower oil.
|Phase||Ingredients||Functionality||% by Weight|
|1||Olea Europea (Olive) Oil||Emollient||17.2|
|Corylus Avellana (Hazelnut) Seed Oil||Feel Enhancer||7.4|
|Balanites Roxburghii (Date) Seed Oil||Feel Enhancer||7.4|
|STEPANQUAT® Soleil||Conditioning Agent||7.4|
|STEPAN-MILD® L3||Skin Feel||5.0|
|NEOBEE® M-20||Emollient, Carrier||24.6|
|Dandy Moderne (Mane & Fils SA) Fragrance||Fragrance||1.5|
|Tocopheryl Acetate (Vitamin E)||Antioxidant||0.1|
- At room temperature, combine oils in Phase 1 with gentle mixing. Mix until homogeneous.
- Add each ingredients in Phase 2 to Phase 1 in the order noted above. Mix until homogenous.
Appearance, as is: Clear, green olive to brown oil
Storage / Stability
4 weeks at 20°C: Stable
4 weeks at 45°C: Stable
4 weeks at 5°C: Stable
Instructions for Use:
Apply a small amount to hands and rub into beard.
BCI = 98. Total Biorenewable Carbon Index (BCI) was calculated only for the Stepan surfactants used in this formulation. Other non-Stepan ingredients were not evaluated. For further information on Stepan's BCI, visit www.stepan.com. The following alternatives to
NEOBEE® M-20 can be used at the same ratio: NEOBEE® M-5 COSMETIC (Caprylic/Capric Triglycerides), Isopropyl Myristate, Isopropyl Palmitate, Dicaprilyl Carbonate or Propylene Glycol at the same ratio. STEPAN-MILD L3-G/MB can be used as a substitute for STEPAN-MILD® L3.
Registered Trademarks of Stepan Company:
For Additional Assistance:
For applications or product handling assistance, call our Technical Service Department at 1-800-745-7837 (U.S.) or 011-334-76-505-100 (Europe).
For ordering assistance, call our Account Service Department at 1-800-457-7673.
The information contained herein is based on the manufacturer’s own study and the works of others and is subject to change without prior notice. The information is not intended to be all-inclusive, including as to the manner and conditions of use, handling, storage or disposal or other factors that may involve additional legal, environmental, safety or performance considerations. Nothing contained herein grants or extends a license, express or implied, in connection with any patents issued or pending of the manufacturer or others, or shall be construed as a recommendation to infringe any patents. STEPAN COMPANY MAKES NO PRODUCT WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR USE, EXPRESS OR IMPLIED, AND NO OTHER WARRANTY OR GUARANTY, EXPRESS OR IMPLIED, IS MADE, INCLUDING AS TO INFORMATION REGARDING PERFORMANCE, SAFETY, SUITABILITY, STABILITY, ACCURACY, COMPLETENESS, OR ADEQUACY. Stepan Company (and its employees, subsidiaries and affiliates) shall not be liable (regardless of fault) to the vendee, its employees, or any other party for any direct, indirect, special or consequential damages arising out of or in connection with the accuracy, completeness, adequacy, furnishing, use, or reliance upon information provided herein. The vendee assumes and releases Stepan Company (and its employees, subsidiaries and affiliates) from all liability, whether in tort, contract or otherwise to the fullest extent possible under the relevant law.
Stepan Europe SAS, Chemin Jongkind, CS 20127, 38341 Voreppe Cedex, France, Phone: +33 4 76 50 51 00
Revision Date: 09/30/2020, Publication Date: 09/30/2020 © 2021, Stepan Company. All rights reserved.