with PURAC® Sanilac
Disinfect surfaces effectively and cut alcohol use
|Ethanol||Ethanol||40||Disinfectant & evaporator|
|PURAC® Sanilac 80||Lactic Acid (and) Water||1.88||Disinfectant|
Mix all ingredients until dissolved. Measure the pH and adjust if necessary.
- Appearance: Transparent Liquid
- pH: 3.5-4.0
- Lower alcohol content
- Antibacterial & antivirus claim
- Lactic Acid EPA & BPR Approved for PT1, 2, 3, and 4
|Formula pH 3.5||EN1276
|Sanitizer, 1.88% PURAC Sanilac 80|
*Tested at Bluetest Laboratories. Mouse coronavirus as human surrogate.
EN1276 and EN1275: 1 min contact time, 80% solution, dirty conditions, > log 5 reduction
EN14476: 1 min contact time, 80% solution, dirty conditions, > 4 log reduction
© Copyright Corbion. All rights reserved. No part of this publication may be copied, downloaded, reproduced, stored in a retrieval system or transmitted in any form by any means, electronic, mechanical photocopied, recorded or otherwise, without permission of the publisher. No representation or warranty is made as to the truth or accuracy of any data, information or opinions contained herein or as to their suitability for any purpose, condition or application. None of the data, information or opinions herein may be relied upon for any purpose or reason. Corbion disclaims any liability, damages, losses or other consequences suffered or incurred in connection with the use of the data, information or opinions contained herein. In addition, nothing contained herein shall be construed as a recommendation to use any products in conflict with existing patents covering any material or its use.