Author M. Sohn, W. Wohlleben, P. Müller, D. Botin, J. Giesinger, M. Schnyder, S. Kruś, S. Acker, B. Herzog
Journal Edition sofw journal 7+8-2022

Abstract

Despite the UV performance benefits of particulate UV filters, concerns have been raised over their potential percutaneous permeation leading to the requirement of a specific approval for all nano UV filters in Europe. Under the legally binding definition of the Cosmetic regulation No. 1223/2009, nanomaterial means […] a material […] on the scale from 1 to 100 nm. The recommendation of the European Commission (2011/696/EU) revised 10 of June 2022 (2022/C229/01) further specifies that a material is nano when at least 50% of the number size distribution of the constituent particles is comprised between 1 and 100 nm. The situation for Titanium Dioxide and Zinc Oxide is confusing since the constituent particles are often part of agglomerates. Some suppliers clearly specify the nano feature of their material, while others declare the non-nano property of their inorganic products. The objective of this study was, therefore, to measure the number-based particle size distribution of three marketed Titanium Dioxide and Zinc Oxide grades using the decision support flow scheme devised by the NanoDefine project. This group was created to support the identification of nanomaterials as required by the European legislation. We employed the tier 1 method asymmetrical flow field-flow fractionation (AF4) coupled with UV and IC-PMS (inductively coupled plasma mass spectroscopy) detectors and tier 2 method transmission electron microscopy (TEM). The study clearly taught that the samples that appeared to be non-nanomaterials with AF4-IC-PMS measurements were finally proven to be nanomaterials using the TEM tier 2 method. Relying only on tier 1 methodologies such as AF4, X-Ray Disc Centrifuge or Dynamic Light Scattering to determine the non-nano property of a material is insufficient, since tier 1 methods are not able to detect constituent particles as part of agglomerates, which is often the case for Titanium Dioxide and Zinc Oxide. The status of being a non-nanomaterial can, in this case, only be certified with a tier 2 technique, particularly electron microscopy.

Back to top

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.