DE 
with IceAwake™
| Phase | Application/ Trade Name | INCI | % w/w |
|---|---|---|---|
| A | Solvent | Aqua/ Water | Add 100 |
| Chelating agent/ EDTA | Disodium EDTA | 0.02 | |
| B | Emulsifier/ Moisturizer | Methyl Gluceth-20 | 2.00 |
| Emulsifier/ Humectant | Methyl Propanediol | 5.00 | |
| Rheology modifier/ Thickening agent | Xanthan Gum | 0.15 | |
| C | Preservative1 | Phenoxyethanol (and) Triethylene Glycol | 0.80 |
| Non-ionic o/w emulsifier2 | Polyglyceryl-6 Distearate (and) Jojoba Esters (and) Polyglyceryl-3 Beeswax (and) Cetyl Alcohol | 2.50 | |
| Base fluid feeling agent3 | Dimethicone | 5.00 | |
| Emulsifier-free/ Gelling agent4 | Isostearyl Alcohol (and) Butylene Glycol Cocoate (and) Ethylcellulose | 2.50 | |
| D | Thickening agent/ Stabiliser5 | Hydroxyethyl Acrylate/ Sodium Acryloyldimethyl Taurate Copolymer | 0.10 |
| Thickening/ Moisturizer6 | Ammonium Acryloyldimethyltaurate (and) Hyaluronic Acid (and) Glyceryl Ester | 5.00 | |
| E | IceAwake™ 7 | Succinic Acid (and) Maltodextrin (and) Aqua/ Water | 2.00 |
| Solvent | Aqua/ Water | 5.00 | |
| F | Perfume | Fragrance | qs |
| pH regulator, citric acid (50 % sol.) | Citric Acid (and) Aqua/ Water | qs |
Manufacturing Procedure
- Dissolve EDTA in water.
- Disperse components of phase B in phase A under strong agitation and stir until completely hydrated.
- Heat up to 70 °C.
- Add components of phase C under strong agitation and stir to homogeneity.
- Add components of phase D under strong agitation and stir to homogeneity while cooling down.
- Premix IceAwake™ in water and add to phase A–D.
- Add perfume under agitation.
- Continue stirring and verify pH after 15 min. Adjust pH to 5.0 – 5.5 – 6.0 if necessary.
1 Iscaguard® PEG by ISCA / 2 Emulium® Mellifera MB by Gattefossé / 3 XIAMETER™ PMX- 200 Silicone Fluid F 50 cS
4 Emulfree® CBG by Gattefossé / 5 Feligel 305s by Guangzhou Dongxiong Chemical /
6 Hydrogel by Shanghai Leasun Chemical Co., Ltd. / 7 IceAwake™ by Mibelle Biochemistry
DISCLAIMER: The information contained in this publication is provided in good faith and is based on our current knowledge. No legally binding promise or warranty regarding the suitability of our products for any specific use is made. Any statements are offered solely for your consideration, investigation and verification and do not relieve you from your obligation to comply with all applicable laws and regulations and to observe all third party intellectual property rights. Mibelle AG Biochemistry will not assume any expressed or implied liability in connection with any use of this information and disclaims any and all liability in connection with your product or its
use. No part of this publication may be reproduced in any manner without the prior written permission of Mibelle AG Biochemistry.
sofw Newsletter
