DE 
Formulation ID: Baycusan® C 1004/1
| Phase | Ingredients | Raw Materials | % by wt. |
|---|---|---|---|
| A | Aqua | 59.60 | |
| Glycerin | 5.00 | ||
| Disodium EDTA | 0.20 | ||
| B | Isononyl Isononanoate | Dub ININ, Stearinerie Dubois | 10.00 |
| Cetyl Ethylhexanoate | Tegosoft® CO, Evonik | 7.00 | |
| Glyceryl Stearate | 2.00 | ||
| Polyglyceryl-3 Stearate | 3.00 | ||
| Sodium Stearoyl Lactylate | 2.00 | ||
| Tocopheryl Acetate | 0.20 | ||
| C | Titanium Dioxide | SunPuro® C475001, SunChemical | 3.70 |
| Iron Oxide | SunPuro® C339001 (Yellow Iron Oxide), SunChemical | 1.00 | |
| Iron Oxide | SunPuro® C338001 (Red Iron Oxide), SunChemical | 0.20 | |
| Iron Oxide | SunPuro® C337001 (Black Iron Oxide), SunChemical | 0.10 | |
| D | Phenoxyethanol (and) Ethylhexylglycerin | Euxyl®PE 9010, schuelke | 1.00 |
| Baycusan® C 1004/1 | 5.00 | ||
| 100.00 | |||
Processing
- Phase A is stirred at 70°C.
- Phase C is added and homogenized.
- Phase B is heated to 70°C and added to phase A/C while homogenizing.
- The system is cooled down to 35-40°C and phase D is added.
- pH is checked and adjusted to 5.5-6.0 with Citric Acid ( 10% sol.) or NaOH (10% sol)
Disclaimer: This information and our technical advice – whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies for all cases where proprietary rights of third parties might be involved. Our advice does not release you from the obligation to check its validity and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility.
Our products are sold in accordance with the current version of our General Conditions of Sale and Delivery.
Published by: Coatings, Adhesives & Specialties Covestro Deutschland AG, 51373 Leverkusen, Germany, www.covestro.com
