DE 
Formulation ID: SU-CES-04
| Phase | Trade Name | INCI Name | Supplier | % (w/w) |
|---|---|---|---|---|
| A | Beeswax | Cera Alba (Beeswax) | Arjun Beeswax Industries | 7.50 |
| Crodamol IPM | Isopropyl Myristate | Croda India | 10.4 | |
| B | Talc | Talc | Local Supplier | 4.00 |
| Kaolin | Kaolin | Sudarshan Chemical Industries Limited | 1.00 | |
| C | SF 1202 | Cyclopentasiloxane | Momentive Performance Materials | 16.6 |
| Silsoft silicone gel | Cyclopentasiloxane (and) Cetearyl Dimethicone/Vinyl Dimethicone Crosspolymer | Momentive Performance Materials | 20.70 | |
| D | SS4230 | Cyclopentasiloxane (and) Trimethylsiloxysilicate | Momentive Performance Materials | 8.00 |
| E | Hariol-03 | Trioctyl Dodecyl Citrate | Local Supplier | 6.00 |
| F | Prestige Blue Glow 35385 | Mica (and) Titanium dioxide | Sudarshan Chemical Industries Limited | 10.0 |
| Prestige Blue 35149 | Mica (and) Titanium dioxide | Sudarshan Chemical Industries Limited | 2.50 | |
| Sumicos Flash Maroon HG955 | Mica (and) Iron Oxide | Sudarshan Chemical Industries Limited | 12.50 | |
| G | Phenoxyethanol | 2-Phenoxyethanol | Local Supplier | 0.40 |
| Perfect 73167 | Perfume | Oriental Aromatics | 0.40 | |
| Total | 100 |
Procedure
- Take phase A in MV and heat it up to 80°C until melt properly. Take phase B (previously sieved) and add into MV Mix well. Cool MV to 60°C.
- Take phase C previously mixed under stirring and add into MV at temperature 60°C or below and mix well.
- Add Phase D & Phase E into MV and mix well at temperature 60°C and below.
- Add ingredients of Phase F to MV sequentially with constant mixing.
- Cool down the MV to about 45-50°C and then add Phase G ingredients with a gentle mixing. Fill in the appropriate containers at the same temperature.
Properties
- pH: Not applicable
- Appearance: Astral pink cream eye shadow with glimpse of blue-maroon sparkle
Disclaimer
These formulations are presented in a good faith and meant to demonstrate how our pearl pigments can be used in various formulations. No warranty of the accuracy or completeness of results, or fitness for a particular use is given; nor is freedom from the infringement of any intellectual/industrial property rights to be inferred. It is provided “as is” aimed at supporting customer development and requires further appropriate evaluations by customers. To the extent permissible by applicable law, Sudarshan Chemical Industries Limited shall in no way be liable for any reliance upon information or materials provided.
