Formulation ID: SC-FR-20-BC-50901-02

PhaseIngredientsINCI% by weightFunction
Water, demin. Aqua 73.75  
Edeta® BD  Disodium EDTA  0.05  Complexing agent
Preservative    q.s.  Preservative
Glycerin  Glycerin  2.00  Humectant
Sorbitol Solution 70% USP (Escuder) Sorbitol  2.00  Humectant
Cosmedia® SP  Sodium Polyacrylate  0.50  Rheology modifier
Tinovis® GTC UP  Acrylates/ Beheneth-25 Methacrylate Copolymer 0.70 Rheology modifier
Sodium Hydroxide (25% solution)  Sodium Hydroxide  q.s.  pH Adjustment
B Plantapon® LGC SORB  Sodium Lauryl Glucose Carboxylate (and) Lauryl Glucoside 1.50 Emulsifier (O/W)
C Dehymuls® PGPH  Polyglyceryl-2 Dipoly­hydroxy­stearate  2.00  Emulsifier (W/O) 
Lanette® 22  Behenyl Alcohol  0.50  Consistency agent
Xiameter PMX-200 Silicone Fluid 100CS (Dow Corning) Dimethicone  1.00  Emollient
Myritol® 331 Cocoglycerides 2.00 Emollient
Cetiol® RLF  Caprylyl Caprylate/ Caprate  4.00  Emollient
Cetiol® C 5  Coco-Caprylate  3.00  Emollient
D Phytofirm™ Biotic BC10138  Lactobacillus/ Soybean Ferment Extract, Pentylene Glycol, Caprylyl Glycol 2.00  Active ingredient
E Syniorage™ PW LS 9847  Mannitol, Acetyl Tetrapeptide-11  1.00  Active ingredient 
Water, demin.  Aqua  4.00  
F Perfume  Parfum  q.s.  Fragrance


  • pH value (20°C): 6.65
  • Viscosity (Brookfield; RVT; spindle 5; 10 rpm; 20°C): 5000 mPa·s


Additional performance has not been evaluated

Manufacturing Process

  1. Prepare Phase A by adding the EDTA, moisturizers and preservative into the water. Add the Cosmedia SP and disperse until having a homogeneous gel. Add the Tinovis GTC UP and adjust the pH value to approx. 6.0 with sodium hydroxide.
  2. Add Phase B into Phase A and heat to 75-80ºC.
  3. Prepare Phase C and heat to 75-80ºC. Add Phace C into Phase A+B under high stirring (around 500 rpm) and T=75-80ºC. Maintain stirring and temperature for 5 minutes and then start cooling. At 65ºC homgenize with Turrax (1 minute, 11,000 rpm).
  4. Continue cooling under moderate stirring (around 300 rpm). At 30ºC add Phase D and E (previously solubilize Syniorage in hot water 50ºC). Finally add the perfume and adjust pH to around 6.6.


Bag in Valve System:
Aluminium Can (volumen 110ml)
Valve-Bag: NKWBU470.847/R-V14.45/110 (COSTER) Difusor + Cup: V04.1808 + V20.87TR (COSTER)
In bag: liquid as is (60g)
Outside bag: Compresed air (10.5 Bar)


While the descriptions, designs, data and information contained herein are presented in good faith and believed to be accurate, it is provided gratis and for your guidance only. Because many factors may affect processing or application /use, we recommend that you make tests to determine the suitability of a product for your particular purpose prior to use. NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, OR THAT DATA OR INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE.

For more information visit us at or

Back to top

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.